3/23/2023 0 Comments Elevator control panelVoice annunciation should be automatically adjusted to remain at least 15 dB above ambient sound. Voice annunciation should be used to identify floors and the direction of travel.Visual characters should be at least 60 mm high.The floor identification information should contrast in colour and brightness to its surroundings in the elevator.Įlevator location floor information should be indicated both audibly and visually: Where provided, the panel that indicates the current floor location should be positioned so that the centre is no more than 1,830 mm from the finished floor. Ensure there is good contrast between the background and the buttons. Consider using buttons at least 50 mm in size with 38 mm dual illumination numerals (i.e., constant backlit numbers). Use larger, backlit buttons, which are easier to see for people with low vision. The same information indicated for each button through raised characters should also be provided just below them in uncontracted braille. Characters should be in a sans serif font and not in an italic, oblique, highly decorative or unusual form. They should be at least 16 mm tall and raised from the surface of the panel by at least 0.8 mm. Raised Arabic numerals, letters and other symbols should be placed to the left of the elevator’s call buttons on a colour/brightness-contrasted background. Floor access can be restricted based on various user credentials, including fingerprint, proximity card, and/or password. The call buttons on each floor should be organized in a logical pattern that is consistent within all elevators in a building. Description Designing specifically for elevator control, ZKteco EC10 panel and EX16 floor extension boards provide customers with the most secured, scalable, versatile, and affordable access control solutions available today. It also makes it easier to read braille and tactile characters.Īll panel buttons should be raised at least 1.5 mm in height from the panel’s surface and should be no smaller than 19 mm in any direction on the surface. Additionally, because they use touch to locate buttons, every heat-sensitive button they touch will be activated.Įlevator panels should be slightly inclined from vertical to make the buttons easier to read without crouching down. Avoid using heat sensitive buttons, as people relying on braille or tactile numbers have no means of knowing when or if a button has been pushed. Where possible, control panels should be on both sides of the door. The control panels inside an elevator cab should be located to the right of the elevator door when facing the door from inside the cab. Time Dose Control Panel - Champion Pump control panel dose pump. Elevator Controller Wiring Diagram - Wiring Diagram & Schemas. SDK is available for software companies that desire to integrate with the system.Home > Design Needs > Interior Design Elements > Elevators > Elevator Control Panels Elevator Control Panels alarm fire system addressable conventional diagram wiring panel smoke bell australia manual detector control connect dc24v outdoor standard py. Our powerful yet easy-to-use software makes the Elevator Control System very easy to manage. Note EC10 panels can be daisy-chained together to control as many floors as desired. When combined together, a total of fifty-eight (58) floors can be controlled with a single EC10 bundle. Each EC10 can support up to three EX16 boards. The EX16 Elevator Floor Extension Board restricts access up to an additional sixteen floors. The EC10 Elevator Control Panel can restrict access to up to ten floors. They used the DC motor for the elevators operation, and H-bridge for changing the motors direction. Click the control panel to which you wish to add an elevator. During normal visits/business hours, unrestricted floor access can also be permitted (aka Passage mode). In 2, PLC was used to control an elevator, and programmed by ladder diagram. From the Setup dropdown menu, choose the Sites/Doors tab then click the Control Panels tab. Pre-defined time schedules can also be used to control floor access. Designing specifically for elevator control, ZKteco EC10 panel and EX16 floor extension boards provide customers with the most secured, scalable, versatile, and affordable access control solutions available today.įloor access can be restricted based on various user credentials, including fingerprint, proximity card, and/or password.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |